Dewalt Drill Bits

DEWALT DW5740 5/8-Inch by 5-Inch by 10-Inch 4-Cutter Spline Shank Rotary Hammer Bit

2011-01-28T18:25:00.001-08:00

DEWALT DW5740 5/8-Inch by 5-Inch by 10-Inch 4-Cutter Spline Shank Rotary Hammer Bit
$36.99

- Rock Carbide tip maximizes carbide surface contact for longer life. Open head design channels more dust out. U-flute design maximizes bit strength. Longer helix increased flute travel expedites dust removal.

Read Original Review

DEWALT DW2169 38-Piece Impact Driver Ready Accessory Set

2011-01-23T12:45:00.001-08:00

DEWALT DW2169 38-Piece Impact Driver Ready Accessory Set
$29.99

- In the last few years, both the usage and popularity of impact drivers has risen as a result of its impact size and non-reactionary torque. DEWALT developed this 38-piece Impact Driver Ready Accessory Set, rated to be used with Impact Drivers and Wrenches. The set includes eight no. 2 phillips 1-inch insert bits, one impact ready 3/8-inch drive 9/16-inch deep socket , eight no. 2 phillips 1-inch drywall reduced diameter insert bits, five no. 2 phillips 2-inch black oxide power bits, eight no. 2 phillips 1-inch double ended bit tips, one 1/4-inch impact ready nut driver, one 5/16-inch impact ready nut driver, one 3/8 -inch impact ready socket adaptor, one impact ready 3/8-inch drive 3/8-inch deep socket, one impact ready 3/8-inch drive 7/16-inch deep socket, one impact ready 3/8-inch drive 1/2-inch deep socket , one impact ready pivoting bit tip holder, and one impact ready 3-inch stainless steel bit tip nolder with hog ring.

Read Original Review

DEWALT DW5785 Ground Rod Driver Spline Shank

2011-01-20T05:20:00.001-08:00

DEWALT DW5785 Ground Rod Driver Spline Shank
$56.75

Read Original Review

Dewalt Accessories 19/64'Splitpt Drill Bit (Pack Of 3) High Speed Steel Jobber Length Drill Bit

2011-01-16T14:20:00.001-08:00

Dewalt Accessories 19/64'Splitpt Drill Bit (Pack Of 3) High Speed Steel Jobber Length Drill Bit

- 19/64' Split Point Drill Bit, With Pilot Point Tip, Starts On Contact For Clean, Accurate Holes, Reduces Lock Up On Breakthrough, No Spin Shank Eliminates Bit Spinning In Chuck, Tapered Web Provides Greater Durability To Reduce Breaking, Size Markings Located Above Shank To Prevent Wearing Away, For Drilling In Wood, Metal Or Plastic.

Read Original Review

DEWALT Screwdriver Bit - #2 Phillips Insert Bit Tip, 25-Pk., Model# DW2002B25

2011-01-12T06:00:00.001-08:00

DEWALT Screwdriver Bit - #2 Phillips Insert Bit Tip, 25-Pk., Model# DW2002B25

- Shock-resistant tool steel for longer life. Snub nose design for ideal fitment. Advanced hardening process provides maximum durability. U.S.A. Tip Type: Phillips Insert Bit Tip, Tip Size: #2, Bits (qty.): 25, Snub Nose Design: Yes, Bit Material: Shock Resistant Tool Steel, Storage Case Included: Yes

Read Original Review

DEWALT DW2521 28-Piece Rapid Load Set

2011-01-08T17:30:00.001-08:00

DEWALT DW2521 28-Piece Rapid Load Set
$43.28

- DEWALT 28 PIECE RAPID LOAD DRILL BIT SET. INCLUDES MAGNETIC DRIVE GUIDES AND CARRY CASE.

Read Original Review

DEWALT DW5403 3/16-Inch by 4-1/2-Inch by 6-1/2-Inch ROCK CARBIDE SDS Plus Hammer Bit

2010-12-29T16:55:00.001-08:00

DEWALT DW5403 3/16-Inch by 4-1/2-Inch by 6-1/2-Inch ROCK CARBIDE SDS Plus Hammer Bit
$2.69

Read Original Review

Bosch 23612 Impactor 12-Volt Ni-Cad Cordless Impact Driver

2010-12-24T08:00:00.001-08:00

Bosch 23612 Impactor 12-Volt Ni-Cad Cordless Impact Driver
$198.95

- Torque, torque, torque-that's what this driver's about. It's lightweight, compact and so simple to use: Just pull the collet locking sleeve forward, chuck in a bit and let the sleeve go and you've got 1,050 inch-pounds of torque in your hand. We got the best results with a little patience, starting slowly, blasting the speed and letting off gently, slowing to a stop. You'll learn to sense when the fastener is seated, because if you give it another go, the tool will twist right out of your hand. A couple of nice features set it apart from the competition, including a super comfortable rubberized grip and an integrated, three-position LED work light. It illuminates when you squeeze the trigger, or, if you prefer, you can turn the thumbwheel and shut the light off (though we found it pretty handy). Unlike other drills and drivers, the brushes on this model are easily accessible for cleaning and eventual replacement-all you need is a coin to twist open the cover. Bosch makes it very clear that this is a driver and shouldn't be used as a drill. We like that it comes with two batteries, so you can one-hour charge one and keep working with the other. If you're turning bolts, nuts or screws on a daily basis, this is definitely worth the investment because it will quickly repay you in time and effort saved.

- REVIEW: Torque, torque, torque—-that's what this driver's about. It's lightweight, compact and so simple to use: Just pull the collet locking sleeve forward, chuck in a bit and let the sleeve go and you've got 1,050 inch-pounds of torque in your hand. We got the best results with a little patience, starting slowly, blasting the speed and letting off gently, slowing to a stop. You'll learn to sense when the fastener is seated, because if you give it another go, the tool will twist right out of your hand. A couple of nice features set it apart from the competition, including a super comfortable rubberized grip and an integrated, three-position LED work light. It illuminates when you squeeze the trigger, or, if you prefer, you can turn the thumbwheel and shut the light off (though we found it pretty handy). Unlike other drills and drivers, the brushes on this model are easily accessible for cleaning and eventual replacement-—all you need is a coin to twist open the cover. Bosch makes it very clear that this is a driver and shouldn't be used as a drill. We like that it comes with two batteries, so you can one-hour charge one and keep working with the other. If you're turning bolts, nuts or screws on a daily basis, this is definitely worth the investment because it will quickly repay you in time and effort saved.--Kris Jensen-Van Heste
Read Original Review

DEWALT DW2008 #8 Slotted Bit Tip, 4 Pack

2010-12-19T03:30:00.001-08:00

DEWALT DW2008 #8 Slotted Bit Tip, 4 Pack
$0.96

Read Original Review

DEWALT DD5011B6 11/64-Inch Impact Drill Bit 6-pack

2010-12-14T09:15:00.001-08:00

DEWALT DD5011B6 11/64-Inch Impact Drill Bit 6-pack

Read Original Review

Dewalt 72 Piece Combination Set

2010-12-05T22:50:00.001-08:00

Dewalt 72 Piece Combination Set
$59.99

- Dewalt 72 Piece Combination Set that includes a 38 piece Screwdriving Set, 21 Piece impact driver accessory set, and a 13 Piece Gold Ferrous Oxide Drill bit set.

Read Original Review

DEWALT DW8330 7-Inch by 5/8-Inch-11 80 Grit Zirconia Angle Grinder Flap Disc

2010-12-01T02:15:00.001-08:00

DEWALT DW8330 7-Inch by 5/8-Inch-11 80 Grit Zirconia Angle Grinder Flap Disc Review

DEWALT DW8330 7-Inch by 5/8-Inch-11 80 Grit Zirconia Angle Grinder Flap Disc Overview

Zirconia grit enables 3X faster material removal than fiber resin metal sanding discs. Premium abrasive cloth provides up to 15 X longer life than fiber resin metal sanding discs. Type 29 fiberglass backing provides grinding angle of 20-25 degrees. Used for weld blending, removing weld slag,deburring, surface finishing and preparation, edge blending and chamfering. .[endif][if ]

DEWALT DW8330 7-Inch by 5/8-Inch-11 80 Grit Zirconia Angle Grinder Flap Disc Specifications

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Dec 01, 2010 02:15:12

3 Pack DeWalt DW2538 #8 Countersink 11/64" Replacement Drill Bit

2010-11-28T01:40:00.001-08:00

3 Pack DeWalt DW2538 #8 Countersink 11/64" Replacement Drill Bit Review

3 Pack DeWalt DW2538 #8 Countersink 11/64" Replacement Drill Bit Feature

Replacement drill bit for the DeWalt countersinks
Four-cutter countersink and tapered drill bit to provide superior speed and finish
Unique design lets you drill, countersink, and counterbore in one step

3 Pack DeWalt DW2538 #8 Countersink 11/64" Replacement Drill Bit Overview

Dewalt DW2538 #8 Countersink 11/64" Replacement Drill Bit[endif][if ]

3 Pack DeWalt DW2538 #8 Countersink 11/64" Replacement Drill Bit Specifications

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Nov 28, 2010 01:40:09

DEWALT DW5507 3/16-Inch by 12-Inch by 14-Inch Solid Rock CarbideSDS+

2010-11-23T22:40:00.001-08:00

DEWALT DW5507 3/16-Inch by 12-Inch by 14-Inch Solid Rock CarbideSDS+
$27.99

- Solid Rock Carbide SDS+ Drill Bits2X More Carbide for Longer LifeFour flute design cleans debris out for fast, efficient drillingInnovative Bonding System delivers the best in durability

Read Original Review

DEWALT DW55300 3/8-Inch by 10-Inch by 12-Inch Solid Rock CarbideSDS+

2010-11-20T03:10:00.001-08:00

DEWALT DW55300 3/8-Inch by 10-Inch by 12-Inch Solid Rock CarbideSDS+
$19.99

- Solid Rock Carbide SDS+ Drill Bits2X More Carbide for Longer LifeFour flute design cleans debris out for fast, efficient drillingInnovative Bonding System delivers the best in durability

Read Original Review

DEWALT DW1667 3/4-Inch by 6-Inch Ship Auger Bit

2010-11-17T03:00:00.001-08:00

DEWALT DW1667 3/4-Inch by 6-Inch Ship Auger Bit
$13.75

Read Original Review

DeWalt DW2547Ir 1/4-Inch Hex Shank To 1/2-Inch Socket Adaptor

2010-11-11T02:45:00.001-08:00

DeWalt DW2547Ir 1/4-Inch Hex Shank To 1/2-Inch Socket Adaptor
$3.88

- With best in its class durability, the impact ready socket adapter is designed for use in impact drivers to quickly convert to socket driving.

Read Original Review

5 Pack DeWalt DW2537 #6 Countersink 9/64" Replacement Drill Bit

2010-11-07T00:25:00.001-07:00

5 Pack DeWalt DW2537 #6 Countersink 9/64" Replacement Drill Bit

- Dewalt DW2537 Replacement drill bit for the DeWalt countersinks. DeWalt countersinks use a four-cutter countersink and tapered drill bit to provide superior speed and finish. Unique design lets you drill, countersink, & counterbore in one step.

Read Original Review

DEWALT DW2025 Deck Bit Tip, 3 Pack

2010-11-03T11:20:00.001-07:00

DEWALT DW2025 Deck Bit Tip, 3 Pack
$2.45

Read Original Review

DEWALT DW5458 27/32-Inch x 6-Inch x 8-Inch Rock Carbide SDS+ Hammer Bit

2010-10-30T10:50:00.001-07:00

DEWALT DW5458 27/32-Inch x 6-Inch x 8-Inch Rock Carbide SDS+ Hammer Bit

- Features: Four flute design - Enlarged flutes clean debris out for fast efficient drilling. * Innovative tip design maximizes carbide surface contact for longer life. * Optimized core diameter maximizes hammer energy for greater impact power.

Read Original Review

DEWALT DW8302 4-Inch by 5/8-Inch 60 Grit Zirconia Angle Grinder Flap Disc

2010-10-27T09:00:00.001-07:00

DEWALT DW8302 4-Inch by 5/8-Inch 60 Grit Zirconia Angle Grinder Flap Disc
$3.68

Read Original Review

DEWALT DW5584 1-Inch Diamond Drill Bit

2010-10-22T05:10:00.001-07:00

DEWALT DW5584 1-Inch Diamond Drill Bit
$33.31 - Drilled holes in glass block. With a fresh battery, about one minute per hole.

Read Original Review

DeWalt DD4132B6 Heavy Duty 1/2-Inch Cobalt Screw Machine Length Drill Bit

2010-10-12T19:43:00.001-07:00

DeWalt DD4132B6 Heavy Duty 1/2-Inch Cobalt Screw Machine Length Drill Bit
$14.92

Read Original Review

DEWALT DW55100 7/32-Inch by 4-Inch by 6-1/2-Inch Solid Rock CarbideSDS+

2010-10-05T18:55:00.001-07:00

DEWALT DW55100 7/32-Inch by 4-Inch by 6-1/2-Inch Solid Rock CarbideSDS+
$11.33

Read Original Review

DEWALT DW5719 7/8-Inch x 11-Inch x 16-Inch 2 Cutter Spline Shank Rotary Hammer Bit

2010-10-02T18:25:00.001-07:00

DEWALT DW5719 7/8-Inch x 11-Inch x 16-Inch 2 Cutter Spline Shank Rotary Hammer Bit
$38.79

Read Original Review

DEWALT DW1907B 7/64-Inch Gold Ferrous Oxide Split Point Twist Drill Bit, 12 Pack

2010-09-29T17:25:00.001-07:00

DEWALT DW1907B 7/64-Inch Gold Ferrous Oxide Split Point Twist Drill Bit, 12 Pack

- 7/64" Split Point drill bitApplications:For drilling in wood, metal, or plasticFeatures:Pilot Point tip starts on contact for clean, accurate holes and reduces lock-up on breakthroughNo-Spin shank eliminates the frustration of bit spinning in the chuckTapered web provides greater durability to reduce breakingSize markings are located above the shank to prevent wearing awayNote: Sizes 1/16" to 11/64" are split point drill bitsStd Jobber Length Fractional Sizes

Read Original Review

DEWALT ACCESSORIES 1/16' COB Drill Bit COBALT JOBBER DRILL BIT

2010-09-26T17:05:00.001-07:00

DEWALT ACCESSORIES 1/16' COB Drill Bit COBALT JOBBER DRILL BIT

- 1/16' Cobalt, Split Point Drill Bit, Industrial Grade Cobalt Steel, For Drilling In Stainless Steel, Abrasive Metal & Other Hard To Drill Alloys.

Read Original Review

DEWALT DW1208-1/8-Inch Cobalt Split Point Twist Drill Bit

2010-09-23T16:35:00.001-07:00

DEWALT DW1208-1/8-Inch Cobalt Split Point Twist Drill Bit
$2.49

Read Original Review

DEWALT DW1922 11/32-Inch Gold Ferrous Oxide Pilot Point Twist Drill Bit

2010-09-20T16:10:00.001-07:00

DEWALT DW1922 11/32-Inch Gold Ferrous Oxide Pilot Point Twist Drill Bit
$4.43

Read Original Review

DEWALT DW5572 Heavy Duty 1/4-Inch Diamond Drill Bit

2010-09-17T15:55:00.001-07:00

DEWALT DW5572 Heavy Duty 1/4-Inch Diamond Drill Bit
$19.74 - I purchased these bits for a job at a local mall where we needed to mount a few appliances on 5/8" marble tile. A regular concrete bit barely scratched this material. These bits worked great using a hand held battery operated drill and constant low speed pressure and a spray water bottle keeping them wet continuously. We made 10 holes per bit and I believe that is really good for the type of material we had.

Read Original Review

Hitachi 728022-1/4-Inch Diamond Core Bit

DEWALT DW5366 Anchor Drive Kit 10-Pieces

2010-09-14T12:15:00.001-07:00

DEWALT DW5366 Anchor Drive Kit 10-Pieces
$19.99 - I checked prices this is a good deal, nice set. Have to get a few single bits to complete the set. The case will hold them and keep them together.

Read Original Review

DEWALT DW5472 Heavy Duty 5/8-Inch by 16-Inch by 18-Inch Rock Carbide(TM) 4 Cutter SDS+ Hammer Bit

2010-09-11T11:50:00.001-07:00

DEWALT DW5472 Heavy Duty 5/8-Inch by 16-Inch by 18-Inch Rock Carbide(TM) 4 Cutter SDS+ Hammer Bit

- 5/8" x 16" x 18" Rock Carbide(TM) 4 Cutter SDS+ Hammer BitApplications:For use with all electric rotary hammersUsed for drilling holes in poured concrete and other masonry up to 1-1/8" diameterFeatures:Rock Carbide Tip for Maximum Durability and Long LifeOpen Head Desgin for Faster Material RemovalEnlongated 4 Flute Design for Faster Drilling

Read Original Review

DEWALT DW5470 5-Piece Rock Carbide SDS Plus Hammer Bit Set

2010-09-07T14:10:00.001-07:00

DEWALT DW5470 5-Piece Rock Carbide SDS Plus Hammer Bit Set
$22.11 - Bought these bit along with my Dewalt SDS Hammer Drill. These bits have been abused and just keep on truckin'.

- The DeWalt DW5470 5-piece Rock Carbide SDS Plus Hammer Bit Set is suitable for drilling in concrete, masonry, artificial stone, and rock. Each bit comes with a rock carbide tip for longer bit life and a 4-flute design that cleans debris out for fast, efficient drilling. These bits fit into standard 3/8-inch and 1/2-inch chucks. This set includes 3/16-x-6-1/2-inch, 1/4-x-4-inch, 1/4-x-6-inch, 3/8-x-6-inch, and 1/2-x-6-inch bits.

Read Original Review

DEWALT DW1668 13/16-Inch by 6-Inch Ship Auger Bit

2010-09-04T13:45:00.001-07:00

DEWALT DW1668 13/16-Inch by 6-Inch Ship Auger Bit
$15.65

- 13/16" x 6" Power Ship Auger BitApplications:Used by electricians drilling rough holes in wood for running wireUsed by power and light workers drilling holes in telephone polesFeatures:Self feed spur for fast material penetrationDual cutting edge for maximum durability in nailsHardened alloy steel provides superior bit life7/16" Ball groove shank allows for quick bit changes

Read Original Review

DEWALT DW5237 Heavy Duty 1/2-Inch by 18-Inch Drill Bit Premium Percussion

2010-09-01T13:35:00.001-07:00

DEWALT DW5237 Heavy Duty 1/2-Inch by 18-Inch Drill Bit Premium Percussion
$16.28

- 1/2" x 18" Drill Bit Premium PercussionApplications:For use with electric or cordless hammerdrills.Used for drilling holes in brick, block, concrete, and masonry up to 1" diameter.Used by electricians, mechanical contractors, and general contractors for fastening applications such as conduit, pipe, duct work, etc.Features:ROCK CARBIDE tip maximizes carbide surface contact for longer bit life.Four flute design cleans debris out for fast, efficient drilling.Three flats on shank eliminate bit slipping in chuck (except DW5232, DW5233, DW5237, DW5238).

Read Original Review

Dewalt Dw4865b25 9" 10tpi Demolition Bi-metal Reciprocating Saw Blade (25 Pack)

2010-08-28T19:00:00.001-07:00

Dewalt Dw4865b25 9" 10tpi Demolition Bi-metal Reciprocating Saw Blade (25 Pack)
$49.95

- DeWALT DW4865B25 9" 10tpi Demolition Bi-Metal Reciprocating Saw Blade (25 Pack) Features: ? 9" 10 TPI Demolition Bi-Metal Reciprocating Saw Blade (25 pack) ? Patented tooth design utilizes sharper tooth geometry for faster cut rates ? Aggressive shank angle increases tooth contact and maintains cutting speed as blade wears, delivering longer life ? Taller high speed steel strip (tallest in the industry) reduces breakage and maximizes tooth durability ? Specially formulated anti-stick coating minimizes friction and gum-up for smoother cuts. ? Blade Type: Straight Back ? Blade Length: 9 ?Teeth per Inch: 10

Read Original Review

DEWALT Titanium Drill Bit - 15/64in., Model# DW1315

2010-08-22T12:30:00.001-07:00

DEWALT Titanium Drill Bit - 15/64in., Model# DW1315

- Features extra-hard titanium coating for maximum life. 135deg split point prevents walking. Has parabolic bit flutes for strength. Ideal for light gauge metal. 15/64in. U.S.A.

Read Original Review

Dewalt #DW1919 19/64"SplitPT Drill Bit

2010-08-19T05:10:00.001-07:00

Dewalt #DW1919 19/64"SplitPT Drill Bit
$3.98

Read Original Review

9/32"Split PT Drill Bit

DeWalt DW2008BL 1-inch #8 Slotted Insert Bit Tip

2010-08-16T05:05:00.001-07:00

DeWalt DW2008BL 1-inch #8 Slotted Insert Bit Tip

- DeWalt DW2008BL 1-Inch #8 Slotted Insert Bit Tip

Read Original Review

DeWalt H4651 DW2219 5/16" x 1-7/8" Magnetic Nut Driver

2010-08-13T03:55:00.001-07:00

DeWalt H4651 DW2219 5/16" x 1-7/8" Magnetic Nut Driver
$1.35

Read Original Review

DEWALT DW5775 3-Inch x 12-Inch Scaling Chisel 3/4-Inch Hex x 21/32-Inch Round Spline Shank

2010-08-10T03:49:00.001-07:00

DEWALT DW5775 3-Inch x 12-Inch Scaling Chisel 3/4-Inch Hex x 21/32-Inch Round Spline Shank
$34.58

- DeWalt DW5775 3" x 12" Scaling Chisel 3/4" Hex x 21/32" Round Spline Shank

Read Original Review

Dewalt #DW1623 11/16" HS Steel Drill Bit

2010-08-07T02:40:00.001-07:00

Dewalt #DW1623 11/16" HS Steel Drill Bit
$19.85

- 11/16" High Speed Split Point Drill Bit, 3/8" Shank, Helix Is 31°ree. Which Minimizes The Over Aggressiveness Of A True Parabolic Flute, 135°ree. Split Point For Quick Start & No Walk Applications, Parabolic Flute Design Improves Chip Ejection In Metal & Wood Drilling Applications, Back Oxide Coating For Greater Resistance To Wear, Industrial Grade Steel, For Drilling In Metal, Wood & Plastic.

Read Original Review

DeWalt T#15/T#20 - PH#1/SL#6 OPEN STOCK Part No. DW2328

2010-08-04T02:35:00.001-07:00

DeWalt T#15/T#20 - PH#1/SL#6 OPEN STOCK Part No. DW2328

- DET#15/T#20 - PH#1/SL#6 - Replac.Applications:For use in bit tip holders for driving screws in a variety of materialsFeatures:Shock-resistant tool steel for longer lifeSnub nose design for ideal fitmentAdvanced hardening process provides maximum durability

Read Original Review

DeWalt DW5230B25 3/8 x 6 Premium Percussion Masonry Drill Bit (Bulk 25)

2010-08-01T02:10:00.001-07:00

DeWalt DW5230B25 3/8 x 6 Premium Percussion Masonry Drill Bit (Bulk 25)

- The DW5230B25 Features: Innovative tip configuration reduces walking for improved accuracy. * Improved carbide tip provides up to 2X longer life. * Optimum grade of carbide provides maximum durability. * Unique flute design efficiently removes dust and reduces binding.

Read Original Review

Black & Decker/DWLT D180016 BiMetal Deep Cut Hole Saw

2010-07-29T02:00:00.001-07:00

Black & Decker/DWLT D180016 BiMetal Deep Cut Hole Saw
$6.40

- 1" hole saw. High-speed steel cutting edge welded to alloy steel body. Cuts material up to 1-3/4" deep. Will cut through a 2x4. Use for cutting in aluminum, brass, bronze, copper, plastic, stainless steel, wood, and other compositions. Sizes from 3/4" t

Read Original Review

DEWALT DW1910B 5/32-Inch Gold Ferrous Oxide Pilot Point Twist Drill Bit, 12 Pack

2010-07-26T01:55:00.001-07:00

DEWALT DW1910B 5/32-Inch Gold Ferrous Oxide Pilot Point Twist Drill Bit, 12 Pack

- 5/32" Pilot Point drill bitApplications:For drilling in wood, metal, or plasticFeatures:Pilot Point tip starts on contact for clean, accurate holes and reduces lock-up on breakthroughNo-Spin shank eliminates the frustration of bit spinning in the chuckTapered web provides greater durability to reduce breakingSize markings are located above the shank to prevent wearing awayNote: Sizes 1/16" to 11/64" are split point drill bitsStd Jobber Length Fractional Sizes

- DeWalt DW1910B 5/32-Inch Gold Ferrous Oxide Pilot Point Drill Bits are specially designed to maximize the performance of your drill. These Pilot Point drill bits are created to solve the common problems professionals encounter when drilling with portable drills into metal and wood: walking, spinning and breaking. The patented Pilot Point tip (sizes 1/8-inch and over), prevents the bit form walking across the workpiece, while providing a clean, round hole. The "no-spin" shank (sizes 3/16-inch and over), overcomes the professional's number one frustration with keyless chucks, bits spinning in the chucks. And, with the patented tapered web, breaking is a thing of the past. This pack includes 12 total bits.

Read Original Review

DEWALT DW1634 1-1/2-Inch Bit with 7/16-Inch Shank Selfeed Bit

2010-07-22T23:10:00.001-07:00

DEWALT DW1634 1-1/2-Inch Bit with 7/16-Inch Shank Selfeed Bit
$15.95

Read Original Review

DeWalt DW5814 13/16 x 16 x 21-1/2 4 Cutter SDS Max Rotary Hammer Bit

2010-07-19T22:55:00.001-07:00

DeWalt DW5814 13/16 x 16 x 21-1/2 4 Cutter SDS Max Rotary Hammer Bit

- Features: Four-cutter head design reduces vibration for less user fatigue. * Double flute design removes dust from the hole quicker allowing for faster drilling. * Hardened core reduces bit breakage.

Read Original Review

Dewalt DW1576B25 Black 5/8" x 6" Wood Boring Bit (Bulk 25) DW1576B25

2010-07-16T22:50:00.001-07:00

Dewalt DW1576B25 Black 5/8" x 6" Wood Boring Bit (Bulk 25) DW1576B25

- 5/8" x 6" Wood Boring Bit (Bulk 25)

Read Original Review

DEWALT DW5846 16-Inch Asphalt Cutter

2010-07-13T22:45:00.001-07:00

DEWALT DW5846 16-Inch Asphalt Cutter

- The DW5846 Features: For light chipping and chiseling of tile, mortar, glazing compounds, and other masonry products.

Read Original Review

DeWalt DW1930 15/32 Pilot Point(R) Drill Bit (3-Pcs.)

2010-07-10T22:30:00.001-07:00

DeWalt DW1930 15/32 Pilot Point(R) Drill Bit (3-Pcs.)
$12.79

- The DW1930 Features: Pilot Point tip starts on contact for clean, accurate holes and reduces lock-up on breakthrough. * No-Spin shank eliminates the frustration of bit spinning in the chuck. * Tapered web provides greater durability to reduce breaking. * Size markings are located above the shank to prevent wearing away.

Read Original Review

DeWalt #2 Phillips Square-Driv® Bit Tip (2 Pack) Part No. DW2602

2010-07-07T22:20:00.001-07:00

DeWalt #2 Phillips Square-Driv® Bit Tip (2 Pack) Part No. DW2602
$2.00

Read Original Review

DeWalt 115-DW1320: Titanium Split Point Drill Bits

2010-07-04T05:25:00.001-07:00

DeWalt 115-DW1320: Titanium Split Point Drill Bits

Read Original Review

DeWalt 115-DW1912B: Pilot Point® Gold Ferrous Oxide Drill Bits

2010-07-01T05:20:00.001-07:00

DeWalt 115-DW1912B: Pilot Point® Gold Ferrous Oxide Drill Bits

Read Original Review

DeWalt 7/8" x 17" x 22" 4 Cutter Spline Shank Rotary Hammer Bit Part No. DW5753

2010-06-28T05:15:00.001-07:00

DeWalt 7/8" x 17" x 22" 4 Cutter Spline Shank Rotary Hammer Bit Part No. DW5753
$59.99

- 7/8" x 17" x 22" 4 Cutter Spline Shank Rotary Hammer BitApplications:For use with all brands of spline rotary hammers.Used for drilling anchor and through holes in poured concrete and other masonry up to 2" diameter.Features:ROCK CARBIDE tip maximizes carbide surface contact for longer bit life.Open head design channels dust into flutes for quicker drilling.Longer helix four flute design expedites mill removal for quicker drilling.

Read Original Review

DEWALT DW8318 5-Inch x 7/8-Inch 80-grit Zirconia Flap Disc

2010-06-25T05:10:00.001-07:00

DEWALT DW8318 5-Inch x 7/8-Inch 80-grit Zirconia Flap Disc
$7.91

- 5" x 7/8" 80g type 29 HP flap discApplications:Weld blending, removing weld slagDeburringSurface finishing and preparationEdge blending and chamferingFeatures:Zirconia grit enables 3X faster material removal than fiber resin metal sanding discsPremium abrasive cloth provides up to 15 X longer life than fiber resin metal sanding discsType 29 fiberglass backing provides grinding angle of 20-25 degrees

Read Original Review

DEWALT DW1956 Pilot Point Twist Drill Bit Assortment, 16-Piece

2010-06-22T04:59:00.001-07:00

DEWALT DW1956 Pilot Point Twist Drill Bit Assortment, 16-Piece
$25.36 - these bits are very hungry to chew through just about anything, all though i haven't had the chance to test out the pilot point yet i'm sure they will work well enough. only problem i have with this set is the case which works well but the biggest two bits are very difficult to remove and replace, but other then that they are great.

- The DeWalt DW1956 16 Piece Pilot Point Twist Drill Bit Assortment comes with pilot point tips for starts on contact that result in clean, accurate holes. These bits are designed to reduce lock-up on breakthrough, and also feature a no-spin shank that eliminates the frustration of bit spinning in the chuck. Other features include a tapered web for greater durability and reduced breaking, and size markings are located above the shank to prevent wearing away. This kit comes with two 1/16-inch, one 5/64-inch, one 3/32-inch, one 7/64-inch, one 1/8-inch, one 9/64-inch, one 5/32-inch, and one 11/64-inch split point drill bits and one 3/16-inch, one 13/64-inch, one 7/32-inch, one 1/4-inch, one 5/16-inch, one 3/8-inch, and one 1/2-inch pilot point drill bits, and a secure carrying case.

Read Original Review

DeWalt DW1922 11/32-Inch Gold Ferrous Oxide Pilot Point Twist Drill Bit

2010-02-28T00:13:00.001-08:00

Buy Cheap DeWalt DW1922 11/32-Inch Gold Ferrous Oxide Pilot Point Twist Drill Bit

Buy Low Price From Here Now

Readmore

Technical Details

See more technical details

Images Product

Buy DeWalt DW1922 11/32-Inch Gold Ferrous Oxide Pilot Point Twist Drill Bit Now

DeWalt DW1614 1/2-Inch by 12-Inch Extra Long Brad Point Twist Drill Bit

2010-02-26T19:40:00.001-08:00

Buy Cheap DeWalt DW1614 1/2-Inch by 12-Inch Extra Long Brad Point Twist Drill Bit

Buy Low Price From Here Now

Readmore

Technical Details

See more technical details

Images Product

Buy DeWalt DW1614 1/2-Inch by 12-Inch Extra Long Brad Point Twist Drill Bit Now

Dewalt Accessories 3/16x6-1/2 Sds Carbide Tip Bit

2010-02-26T19:26:00.001-08:00

Buy Cheap Dewalt Accessories 3/16x6-1/2 Sds Carbide Tip Bit

Buy Low Price From Here Now
Sold as each. SDS shank. Carbide tipped. . 3/16", 6-1/2"L, 4-1/2" Usable . Manufacturer's number: DW5403. Country of origin: Germany. Distributed by B&D P.T.A./Dewalt P.T.A.
Readmore

Technical Details

- Made By Dewalt Accessories Part Number: DW5403
- Height: 0.9 Inches
- Width: 7.4 Inches
- Length: 3.4 Inches
- Made in the USA
See more technical details

Images Product

Buy Dewalt Accessories 3/16x6-1/2 Sds Carbide Tip Bit Now

DeWalt DW2570 #12 Countersink with 7/32-Inch Drill Bit

2010-02-26T19:25:00.001-08:00

Buy Cheap DeWalt DW2570 #12 Countersink with 7/32-Inch Drill Bit

Buy Low Price From Here Now
The DeWalt countersink with tapered drill bit is ideal for fine-wood drilling and provides you with superior speed while leaving an ideal finish. Using a four-cutter countersink and 7/32-inch drill bit, this product is uniquely designed to allow you to drill, countersink, and counterbore all in one step. Replacement tapered bits are available.
Readmore

Technical Details

See more technical details

"Good screw hider" 2001-06-07
By Jonathan Conway (Schuylkill Haven, Pa United States)
These bits work well, but the countersink could be a little sharper as could the flutes of the tapered bit. Oak and maple are a litle tough on these bits, as they are on any for that matter, but overall, they are worth more than the price. Also Dewalt could undersize the countersink about 1/32" as most tapered 1/2" plugs end up being a little loose.

Images Product

Buy DeWalt DW2570 #12 Countersink with 7/32-Inch Drill Bit Now

DEWALT DW5242 5/8-Inch x 12-Inch Carbide Hammer Drill Bit

2010-02-26T19:20:00.001-08:00

Buy Cheap DEWALT DW5242 5/8-Inch x 12-Inch Carbide Hammer Drill Bit

Buy Low Price From Here Now

Readmore

Technical Details

See more technical details

"through hardened concrete like butter :)" 2000-06-26
By
well, okay, not that fast, but after drilling a couple of holes through a hardened concrete wall, very little wear on the carbide tip.

Images Product

Buy DEWALT DW5242 5/8-Inch x 12-Inch Carbide Hammer Drill Bit Now

DEWALT DW5245 3/4-Inch x 12-Inch Carbide Hammer Drill Bit

2010-02-26T19:19:00.001-08:00

Buy Cheap DEWALT DW5245 3/4-Inch x 12-Inch Carbide Hammer Drill Bit

Buy Low Price From Here Now

Readmore

Technical Details

See more technical details

Images Product

Buy DEWALT DW5245 3/4-Inch x 12-Inch Carbide Hammer Drill Bit Now

DeWalt DW2569 #10 Countersink with 3/16-Inch Drill Bit

2010-02-06T01:23:00.001-08:00

Buy Cheap DeWalt DW2569 #10 Countersink with 3/16-Inch Drill Bit

Buy Low Price From Here Now
The DeWalt Countersink with tapered drill bit is ideal for fine wood drilling and provides you with superior speed while leaving an ideal finish. Using a four-cutter countersink and 3/16-inch drill bit, this product is uniquely designed to allow you to drill, countersink, and counterbore all in one step. This countersink is back by a 1-year warranty and service contract; replacement tapered bits are available.
Readmore

Technical Details

See more technical details

"DeWalt countersink" 2007-04-11
By Mark Reed Builders Inc. (North Port , Fl. USA)
This is the best countersink on the market. I'm using it on a job right now, an Ipe deck , it's very hard wood and this thing just makes the job

a whole lot easier

"Can't be beat" 2002-06-10
By kathy allen-stouffer (Kalamazoo MI)
I have used these counter sinking bits for about 2 years now and am still very satisfied. The tapered point along with the deep flutes on the shaft make this a fast and smooth cuttig bit. The key is the deep fluting which get the wood chipps out of the hole and out of the way. There is no way to remove the bit half way through the cut to clear the chips. Also the countersink is ideal for installing buttons and plugs into.

Images Product

Buy DeWalt DW2569 #10 Countersink with 3/16-Inch Drill Bit Now

DeWalt DW2336 7 Piece 6-in-1 Flip and Switch Driver System

2010-02-06T01:20:00.001-08:00

Buy Cheap DeWalt DW2336 7 Piece 6-in-1 Flip and Switch Driver System

Buy Low Price From Here Now
The DeWalt 7-Piece 6-in-1 Heavy Duty Driver Set allows you to change screwdriving bits as fast as you work. This 6-in-1 driver stores all six drivers in one holder for quick and easy use, and to eliminate the frustration of losing bits. To operate the driver, simply flip the switch. Ideal for applications where multiple geometries are needed, this includes the most common geometries. This set comes with a 3-year warranty.

What's in the Box
The DeWalt 6-in-1 heavy duty driver, holder, intermediate tube, and two double ended tips.
Readmore

Technical Details

See more technical details

Images Product

Buy DeWalt DW2336 7 Piece 6-in-1 Flip and Switch Driver System Now

DeWalt DW1629 1-Inch 1/2-Inch Reduced Shank Twist Drill Bit

2010-02-01T19:58:00.001-08:00

Buy Cheap DeWalt DW1629 1-Inch 1/2-Inch Reduced Shank Twist Drill Bit

Buy Low Price From Here Now

Readmore

Technical Details

- .
See more technical details

Images Product

Buy DeWalt DW1629 1-Inch 1/2-Inch Reduced Shank Twist Drill Bit Now

DEWALT DW5819 1-Inch x 16-Inch x 21-1/2-Inch 4-Cutter SDS Max Rotary Hammer Bit

2010-02-01T19:55:00.001-08:00

Buy Cheap DEWALT DW5819 1-Inch x 16-Inch x 21-1/2-Inch 4-Cutter SDS Max Rotary Hammer Bit

Buy Low Price From Here Now
The DW5819 SDS Max Rotary Hammer Bit handles the toughest concrete, stone, and other masonry materials with ease. Its Rock Carbide tip extends bit life much longer than other bits, and its tough steel construction makes this hammer bit durable and long-lasting. The DW5819's open head design helps channel dust and debris into the flutes for more efficient drilling, and the helix four-flute construction removes this debris from the drilling surface quickly for easier drilling. This bit measures one-inch in diameter, 16 inches usable length, and 21-1/2 inches overall length.
Readmore

Technical Details

- Rock Carbide tip for extended lifespan and better drilling
- Open head design channels dust and debris into flutes more efficiently
- Helix four-flute design removes dust and debris quick for easier drilling
- Measures 1-inch in diameter; 16 inches usable length; 21-1/2 inches overall length
- Includes one SDS Max Rotary Hammer Bit
See more technical details

Images Product

Buy DEWALT DW5819 1-Inch x 16-Inch x 21-1/2-Inch 4-Cutter SDS Max Rotary Hammer Bit Now

DeWalt DW1206 3/32-Inch Cobalt Split Point Twist Drill Bit

2010-02-01T19:52:00.001-08:00

Buy Cheap DeWalt DW1206 3/32-Inch Cobalt Split Point Twist Drill Bit

Buy Low Price From Here Now

Readmore

Technical Details

- .
See more technical details

Images Product

Buy DeWalt DW1206 3/32-Inch Cobalt Split Point Twist Drill Bit Now

Dewalt DW2735P Drill Flip Drive Kit, 12-Piece

2010-02-01T19:49:00.001-08:00

Buy Cheap Dewalt DW2735P Drill Flip Drive Kit, 12-Piece

Buy Low Price From Here Now
The DEWALT DW2735P 12-piece Drill Flip Drive Kit features high-quality bits with durable 5/16-inch shanks. The black oxide drill bits produce less walking than other drill bits for more precise, accurate drilling. The multi-cutter countersinks produce a superior finish with less chipping. The innovative quick-change mechanism ensures quick and easy one-step loading.
Readmore

Technical Details

- Quick-change mechanism enables lightning-quick bit changes
- 5/16-Inch shanks for increased durability
- Multi-cutter countersinks produce a superior finish with less chipping
- Easy 1-handed release for quicker changes
- Kit contains: drill drive holder, drill drive connector, (three) countersink bits, (four) replacement drill bits and heavy-duty container, (three) screwdriver bits
See more technical details

"The Best of Its Kind" 2009-12-10
By Henry Barns (Boiling Springs, PA)
Dewalt's Flip-Drive system is the best of its kind for drilling precise pilot holes and driving #6, #8, and #10 wood screws.

"Dewalt Drill Flip Drive Kit" 2009-03-04
By Al R. (Glenside, PA USA)
I purchased this set because these flip drives are the handiest tools to have with your drill for woodworking outside of the shop. The combination of drill bit, countersink and magnetic philips head driver allows you quickly install many things.

"dewalt 12 piece flip drive" 2009-01-29
By C. Pille (Ames, Iowa)
I really like this flip drive system. The four blades cut into the wood much quicker and easier than other flip drive systems I've used. And it always makes the perfect size countersink, and doesn't go to deep. The screw head is just barely below the surface of the wood.

"Dewalt Drill Flip Drive Kit - 12 pieces" 2009-01-06
By K. Woods
Item was mailed promptly and is just what we hoped it would be - excellent condition and buying experience.

"love the idea ..but hate ..." 2006-02-11
By A. Mandeville (Connecticut)
the weak bits...the cutter are excellent, but the bits break easy. I replaced them with some irwins and use the cutter and the quick change ...good but just beware the drill bits

Images Product

Buy Dewalt DW2735P Drill Flip Drive Kit, 12-Piece Now

DEWALT DW5231 3/8-Inch x 12-Inch Carbide Hammer Drill Bit

2010-02-01T19:46:00.001-08:00

Buy Cheap DEWALT DW5231 3/8-Inch x 12-Inch Carbide Hammer Drill Bit

Buy Low Price From Here Now

Readmore

Technical Details

- .
See more technical details

Images Product

Buy DEWALT DW5231 3/8-Inch x 12-Inch Carbide Hammer Drill Bit Now

3-Pc. Countersink Set - Dw2535 3 Pc Countersink Set

2010-01-15T21:55:00.001-08:00

Buy Cheap 3-Pc. Countersink Set - Dw2535 3 Pc Countersink Set

Buy Low Price From Here Now
* Drill, countersink and counterbore in one step * Four-cutter countersink and tapered drill bit, provide superior speed and finish * Adjustable for different screw lengths * Includes 3 sizes: #6, 9/64"; #8, 11/64"; and #10, 3/16" * Carded
Readmore

Technical Details

- Contains #6, #8 and #10 countersinks
See more technical details

Images Product

Buy 3-Pc. Countersink Set - Dw2535 3 Pc Countersink Set Now

12" Extra Long Drill Bit - Dw1608 5-16In. X12in. Hss Drill Bit

2010-01-15T21:52:00.001-08:00

Buy Cheap 12" Extra Long Drill Bit - Dw1608 5-16In. X12in. Hss Drill Bit

Buy Low Price From Here Now
5/16x12 split point bit. 135 split point. Black oxide coating. Parabolic flute for improved chip ejection. 12" length. 3/8" shank. 5/16"
Readmore

Technical Details

- For drilling in metal, wood & plastic
- 135 deg. split point drills on contact-
- prevents walking
- Parabolic flute improves chip ejection
- Black oxide coated for wear resistance
See more technical details

Images Product

Buy 12" Extra Long Drill Bit - Dw1608 5-16In. X12in. Hss Drill Bit Now

DEWALT DW5574 Heavy Duty 5/16-Inch Diamond Drill Bit

2010-01-09T19:08:00.001-08:00

Buy Cheap DEWALT DW5574 Heavy Duty 5/16-Inch Diamond Drill Bit

Buy Low Price From Here Now

Readmore

Technical Details

See more technical details

Images Product

Buy DEWALT DW5574 Heavy Duty 5/16-Inch Diamond Drill Bit Now

DEWALT DW2555 5/32-Inch Hex Shank Drill Bit

2010-01-09T19:05:00.001-08:00

Buy Cheap DEWALT DW2555 5/32-Inch Hex Shank Drill Bit

Buy Low Price From Here Now

Readmore

Technical Details

See more technical details

"Great, but hard to find and somewhat overpriced" 2002-12-29
By
This is part of the locking hex shank (Rapid Load) collection. The hex shank bits are quick to change and don't slip under high-torque. I've found these bits last a decent amount. At least a lot better than the Stanley and junk Vermont American bits (which only last about one hole).

Overall, the hex shank bits do cost significantly more than the simple round bits. The ease at switching between drill bits, countersinks, phillips bits, etc., during a project is worth it.

Images Product

Buy DEWALT DW2555 5/32-Inch Hex Shank Drill Bit Now

DEWALT DW2556 3/16-Inch Hex Shank Drill Bit

2010-01-03T20:17:00.001-08:00

Buy Cheap DEWALT DW2556 3/16-Inch Hex Shank Drill Bit

Buy Low Price From Here Now

Readmore

Technical Details

See more technical details

Images Product

Buy DEWALT DW2556 3/16-Inch Hex Shank Drill Bit Now

DEWALT DW5576 Heavy Duty 3/8-Inch Diamond Drill Bit

2010-01-03T20:16:00.001-08:00

Buy Cheap DEWALT DW5576 Heavy Duty 3/8-Inch Diamond Drill Bit

Buy Low Price From Here Now

Readmore

Technical Details

See more technical details

Images Product

Buy DEWALT DW5576 Heavy Duty 3/8-Inch Diamond Drill Bit Now

DeWalt DW2002B25 #2 Phillips Bit Tip, 25 Pack

2010-01-03T20:13:00.001-08:00

Buy Cheap DeWalt DW2002B25 #2 Phillips Bit Tip, 25 Pack

Buy Low Price From Here Now
The DeWalt DW2002B25 Heavy Duty 1-Inch #2 Phillips Screwdriving Bit Tips features bits that are created from shock-resistant tool steel for longer life. Their snub-nose design makes for an ideal fit, and their advance hardening process provides maximum durability for long life and less stripping. This pack includes 25 bits in a heavy plastic box.
Readmore

Technical Details

See more technical details

"Don't use them in an impact gun!!" 2008-03-23
By Bigj (North Carolina)
I bought a pack of these after my Bosch Titanium bits finally wore out -boy was I disappointed - I drive screws all day long and I use the great Makita Li-Ion 18 impact gun - these bits are continually snapping and breaking leaving their schrapnel wedged in the screwhead....If you do screws for a living like I do-invest in the titaniums from Bosch - they last a longggg time.

"Good bits" 2006-09-20
By Coffee Lover
Hi everyone. These bits seem to be good and strong. I haven't snapped one yet. Decent price for what you get

"Bit and Bits and Bits" 2006-03-17
By Tim Taylor (Northeast US)
These are strong bits. The points are not easily destroyed. A pack of 25 will last a homeowner a lifetime, and a contractor a pretty good while at that. (Provided you don't lose them like I do)

Images Product

Buy DeWalt DW2002B25 #2 Phillips Bit Tip, 25 Pack Now

DeWalt DW1594 7/8-Inch by 16-Inch Spade Drill Bit

2009-12-26T19:58:00.001-08:00

Buy Cheap DeWalt DW1594 7/8-Inch by 16-Inch Spade Drill Bit

Buy Low Price From Here Now

Readmore

Technical Details

- .
See more technical details

Images Product

Buy DeWalt DW1594 7/8-Inch by 16-Inch Spade Drill Bit Now

DeWalt DW1363 13 Bit Titanium Split Point Twist Drill Bit Assortment

2009-12-25T00:08:00.001-08:00

Buy Cheap DeWalt DW1363 13 Bit Titanium Split Point Twist Drill Bit Assortment

Buy Low Price From Here Now

Readmore

Technical Details

See more technical details

Images Product

Buy DeWalt DW1363 13 Bit Titanium Split Point Twist Drill Bit Assortment Now

DEWALT DW5584 Heavy Duty 1-Inch Diamond Drill Bit

2009-12-22T19:38:00.001-08:00

Buy Cheap DEWALT DW5584 Heavy Duty 1-Inch Diamond Drill Bit

Buy Low Price From Here Now

Readmore

Technical Details

See more technical details

"Excellent tool" 2007-12-13
By Michael Manfull (Utah)
Drilled holes in glass block. With a fresh battery, about one minute per hole.

Images Product

Buy DEWALT DW5584 Heavy Duty 1-Inch Diamond Drill Bit Now

DEWALT DW5832 12-Inch Bull Point Bit SDS Max Shank

2009-12-17T23:19:00.001-08:00

Buy Cheap DEWALT DW5832 12-Inch Bull Point Bit SDS Max Shank

Buy Low Price From Here Now
The DEWALT DW5832 12-inch Bull Point Bit SDS Max Shank takes care of light chipping and chiseling of tile, mortar, glazing compounds, and other masonry materials. This versatile SDS bit is built to last. Its hardened steel construction provides maximum durability for a longer bit life. Use with DEWALT SDS Max Rotary hammer drills for best performance.
Readmore

Technical Details

- Hardened steel body for less breakage
- Easy chiseling and chipping when used with a SDS Max rotary hammer drill
- Handles most masonry materials -- concrete, mortar, glazing compounds, and more
- 12 inches long
- Includes one bull point bit
See more technical details

Images Product

Buy DEWALT DW5832 12-Inch Bull Point Bit SDS Max Shank Now

DEWALT DW2730 8 Piece Quick Change Drill and Drive Set

2009-12-14T19:24:00.001-08:00

Buy Cheap DEWALT DW2730 8 Piece Quick Change Drill and Drive Set

Buy Low Price From Here Now
Increase your drilling to driving efficiency with the DEWALT DW2730 8 piece drill and drive set. Equipped with a rapid change system, this set makes the transition from boring to driving a snap – simply bore into your material, turn the tip over, and drive in your fastener.
Readmore

Technical Details

- Easy to switch between functions with rapid change system and single handed release
- Black oxide split point drill bits initiate at first touch
- Finger grip is curved for ultimate comfort while in use
- Sturdy 5/16-inch shank increases endurance
- Multi-cutter countersinks provide clean results
See more technical details

"somewhat disappointed" 2008-02-13
By Steve T. Clark (Merced, CA)
Bought this to replace a Makita driver kit that worked well for many years. The quick release was not positive nor easy to secure. I expected more from DeWalt products. The drill bit came out several times during the first use and it is easy for the small hex screws to fall out and get lost. The Makita kit I used before had a hex wrench built in to the driver so you would have to worry about losing the provided wrench. This product works but I expected DeWalt products to be much better.

"Excellent product" 2007-12-14
By Philip V. Marinaccio
This is my second purchase. I owned one for over five years until I dropped it and bent the shaft. I've always use it to predrill when driving screws. Works like a charm!

Images Product

Buy DEWALT DW2730 8 Piece Quick Change Drill and Drive Set Now

DeWalt DW2539 #10 Countersink 3/16-Inch Replacement Drill Bit Only

2009-12-12T05:57:00.001-08:00

Buy Cheap DeWalt DW2539 #10 Countersink 3/16-Inch Replacement Drill Bit Only

Buy Low Price From Here Now

Readmore

Technical Details

See more technical details

"Just what I needed..." 2007-03-11
By Joshua L. Duke (Colorado Springs, CO USA)
This was just what I needed. I didn't waste the countersink part of my old bits. Just buying the drill bit is perfect@..

Images Product

Buy DeWalt DW2539 #10 Countersink 3/16-Inch Replacement Drill Bit Only Now

DeWalt DW2330 4 Piece 6-in-1 Flip and Switch Driver System

2009-12-11T21:16:00.001-08:00

Buy Cheap DeWalt DW2330 4 Piece 6-in-1 Flip and Switch Driver System

Buy Low Price From Here Now
The DeWalt 4-Piece 6-in-1 Heavy Duty Driver Set allows you to change screwdriver bits as fast as you work. This 6-in-1 driver stores all six drivers in one holder for quick and easy use, and to eliminate the frustration of losing bits. To operate the driver, simply flip the switch. Ideal for applications where multiple geometries are needed, this includes the most common geometries. This set comes with a 3-year warranty.

What's in the Box
The DeWalt 6-in-1 Heavy Duty Driver, holder, intermediate tube, and two double-ended tips.
Readmore

Technical Details

See more technical details

"Handy Dandy" 2009-03-01
By Myron D. Judkins (Wa State USA)
I Love it, but if you loose one bit or wear it out, you must buy a whole new unit. I fount that it has easy 1/4 and 5/16 sockets (with bits removed) for hex head screws and most hose clamps etc. Functionality is 5 star, but as mt Phillips head gets a little worn, I begin to wonder about those replacement parts.

"All you need" 2007-01-11
By S. Belaire (Raleigh,NC)
Works great, you'll always have the bit you need. The plastict shealthing tends to slips off, but that does not affect it's function.

Images Product

Buy DeWalt DW2330 4 Piece 6-in-1 Flip and Switch Driver System Now

DeWalt DW2050 Quick Change 3-Inch Magnetic Bit Tip Holder

2009-12-11T21:15:00.001-08:00

Buy Cheap DeWalt DW2050 Quick Change 3-Inch Magnetic Bit Tip Holder

Buy Low Price From Here Now

Readmore

Technical Details

See more technical details

"bit holder" 2008-06-16
By Sonny (nc United States)
this bit lost it's ability to hold bits way to soon after purchase. I do not recommend it.

Images Product

Buy DeWalt DW2050 Quick Change 3-Inch Magnetic Bit Tip Holder Now

DeWalt 52 Piece Drill/Driver Contractor Set

2009-12-03T22:09:00.001-08:00

Buy Cheap DeWalt 52 Piece Drill/Driver Contractor Set

Buy Low Price From Here Now
DW2178 52 Piece Drill/Drive Contractor Set
Readmore

Technical Details

- 21 Phillips Bits
- 7 Flat Head Bits
- 18 Square Bits
- 5 Drill Bits
- 1 Quick Drive
See more technical details

Images Product

Buy DeWalt 52 Piece Drill/Driver Contractor Set Now

DEWALT DW5582 Heavy Duty 3/4-Inch Diamond Drill Bit

2009-11-29T18:07:00.001-08:00

Buy Cheap DEWALT DW5582 Heavy Duty 3/4-Inch Diamond Drill Bit

Buy Low Price From Here Now

Readmore

Technical Details

See more technical details

Images Product

Buy DEWALT DW5582 Heavy Duty 3/4-Inch Diamond Drill Bit Now

DeWalt DW1787 7/8-Inch,1-1/8-Inch, and 1-3/8-Inch 1/2-Inch Shank Step Drill Bit

2009-11-27T00:25:00.001-08:00

Buy Cheap DeWalt DW1787 7/8-Inch,1-1/8-Inch, and 1-3/8-Inch 1/2-Inch Shank Step Drill Bit

Buy Low Price From Here Now
The DEWALT DW1787 7/8-Inch,1-1/8-Inch, and 1-3/8-Inch 1/2-Inch Shank Step Drill Bit offers you maximum versatility with self starting, single hole, multiple hole, and hole enlarging capabilities in metric and standard sizes. The bit includes a double-fluted design that enhance speed and accuracy. Easy-to-read size markings offer simple hole identification. The innovative bit design also features flats on the shank to eliminate slipping in the chuck.
Readmore

Technical Details

- Shank step drill bit with self starting and hole enlarging capabilities in metric and standard sizes
- Tackles single- and multiple-hole projects
- Double-fluted design enhances speed and accuracy
- Measures 5.8-by-3.9-by-1.4 inches; weighs 6.6 ounces
- Flats on shank eliminate slipping in the chuck
See more technical details

Images Product

Buy DeWalt DW1787 7/8-Inch,1-1/8-Inch, and 1-3/8-Inch 1/2-Inch Shank Step Drill Bit Now

DeWalt 17 Piece Rapid Load Drill Bit Set #DW2502HD

2009-11-23T22:05:00.001-08:00

Buy Cheap DeWalt 17 Piece Rapid Load Drill Bit Set #DW2502HD

Buy Low Price From Here Now
This 17-piece Rapid Load(R) drill bit set from DeWalt makes bit changes quick and easy. It includes the most common size bits to complete every day tasks, and is suitable for use with either 3/8? or ? drills. A hex shank locking system prevents the frustration of spinning bits while working on tough projects.
Readmore

Technical Details

See more technical details

Images Product

Buy DeWalt 17 Piece Rapid Load Drill Bit Set #DW2502HD Now

Black & Decker #DW1163SDRL 66PC Dewalt Bit Set

2009-11-21T04:06:00.001-08:00

Buy Cheap Black & Decker #DW1163SDRL 66PC Dewalt Bit Set

Buy Low Price From Here Now
66 Piece, Dewalt Accessory Bit Set, Contains 13 Piece Back Oxide Drill Bit Set Model #DW1163 True Value #653-311, 15 Piece Rapid Load Set #Model DW2513 True Value #783-365, 13 Piece Screwdriving Set #Model DW2160 True Value #291-377 & 25 Piece Insert Bit Tip Set Model #DW2125CC, Promo Package.
Readmore

Technical Details

- Black & Decker #DW1163SDRL 66PC Dewalt Bit Set
- BLACK & DECKER POWER TOOLS
See more technical details

Images Product

Buy Black & Decker #DW1163SDRL 66PC Dewalt Bit Set Now

DEWALT DW5578 Heavy Duty 1/2-Inch Diamond Drill Bit

2009-11-19T19:10:00.001-08:00

Buy Cheap DEWALT DW5578 Heavy Duty 1/2-Inch Diamond Drill Bit

Buy Low Price From Here Now

Readmore

Technical Details

See more technical details

"1/2 inch diamond drill bit" 2008-12-11
By Lisa Buchan
I used this product to drill holes in glass blocks. I only got about 6 uses and it already dull. The last one took almost 1 hour.

Images Product

Buy DEWALT DW5578 Heavy Duty 1/2-Inch Diamond Drill Bit Now

DEWALT Titanium Drill Bit - 1/16in., Model# DW1304

2009-11-16T18:23:00.001-08:00

Buy Cheap DEWALT Titanium Drill Bit - 1/16in., Model# DW1304

Buy Low Price From Here Now
Features extra-hard titanium coating for maximum life. 135deg split point prevents walking. Has parabolic bit flutes for strength. Ideal for light gauge metal. 1/16in. U.S.A.
Readmore

Technical Details

- Extra hard titanium coating for maximum service l
- Industrial M7 grade steel
- Ideal for drilling in metal, wood and plastic
- Articulating tool rests and diamond wheel dresser for optimal convenience
- DW1304: 1/16"
See more technical details

Images Product

Buy DEWALT Titanium Drill Bit - 1/16in., Model# DW1304 Now

DeWalt DW2160 13 Bit Tip Assortment with Bit Tip Driver

2009-11-12T20:09:00.001-08:00

Buy Cheap DeWalt DW2160 13 Bit Tip Assortment with Bit Tip Driver

Buy Low Price From Here Now

Readmore

Technical Details

See more technical details

Images Product

Buy DeWalt DW2160 13 Bit Tip Assortment with Bit Tip Driver Now

DEWALT DW2557 1/4-Inch Hex Shank Drill Bit

2009-11-09T18:55:00.001-08:00

Buy Cheap DEWALT DW2557 1/4-Inch Hex Shank Drill Bit

Buy Low Price From Here Now

Readmore

Technical Details

See more technical details

"Better Quality than Most" 2001-02-13
By
I've received good durability out of my DeWalt hex shank drill bits. The "black oxide" may not be as "fancy" as some of its competitors, but some of the cheaper brands are too brittle and just chip/fall apart. I would give it 5 stars if it was priced cheaper. 1/4" is a popular size and although the bit sets are more economical, you wind up collecting too many odd sizes that are not used.

Images Product

Buy DEWALT DW2557 1/4-Inch Hex Shank Drill Bit Now

DeWalt DW1572 3/8-Inch by 6-Inch Spade Drill Bit

2009-11-07T04:36:00.001-08:00

Buy Cheap DeWalt DW1572 3/8-Inch by 6-Inch Spade Drill Bit

Buy Low Price From Here Now

Readmore

Technical Details

- .
See more technical details

Images Product

Buy DeWalt DW1572 3/8-Inch by 6-Inch Spade Drill Bit Now

2 Pack DeWalt DW2567 #6 Countersink with 9/64" Drill Bit

2009-11-03T19:11:00.001-08:00

Buy Cheap 2 Pack DeWalt DW2567 #6 Countersink with 9/64" Drill Bit

Buy Low Price From Here Now
DeWalt DW2567 #6 Countersink with 9/64" Drill Bit
Readmore

Technical Details

- One year warranty, One year service contract, 30 day no-risk trial
- Drill, countersink and counterbore in one step
- Four-cutter countersink and tapered drill bit provide superior speed
- Leaves ideal finish
- With 9/64" drill bit
See more technical details

Images Product

Buy 2 Pack DeWalt DW2567 #6 Countersink with 9/64" Drill Bit Now

DeWALT 14 Pc Titanium Pilot Point Drill Bit Set DW1368

2009-11-03T19:10:00.001-08:00

Buy Cheap DeWALT 14 Pc Titanium Pilot Point Drill Bit Set DW1368

Buy Low Price From Here Now
DeWALT 14 Pc Titanium Pilot Point Drill Bit Set DW1368

Titanium for Maximum Life
Pilot Point tip (3/16" & larger)- starts on contact for clean, accurate holes and reduces lock-up on breakthrough
No spin shank (3/16" & larger)- eliminates bit slipping in chuck
Sizes include: 1/16" (2), 5/64", 3/32", 7/64", 1/8" (2), 9/64", 3/8", 5/16", 1/4", 7/32", 3/16", 5/32"
Tough Case Container has sliding grip lock keeping case closed
Container has bit markings for easy identification and organization
Pilot Point Tip eliminates walking at start-up.
Titanium coating for extended life.
Tapered web design for durability and extended life.
Readmore

Technical Details

See more technical details

Images Product

Buy DeWALT 14 Pc Titanium Pilot Point Drill Bit Set DW1368 Now

DeWalt DW2538 #8 Countersink 11/64-Inch Replacement Drill Bit Only

2009-10-30T04:16:00.001-07:00

Buy Cheap DeWalt DW2538 #8 Countersink 11/64-Inch Replacement Drill Bit Only

Buy Low Price From Here Now

Readmore

Technical Details

See more technical details

Images Product

Buy DeWalt DW2538 #8 Countersink 11/64-Inch Replacement Drill Bit Only Now

DeWalt DW2568 #8 Countersink with 11/64-Inch Drill Bit

2009-10-26T21:49:00.001-07:00

Buy Cheap DeWalt DW2568 #8 Countersink with 11/64-Inch Drill Bit

Buy Low Price From Here Now
The DeWalt Countersink with tapered drill bit is ideal for fine wood drilling and provides you with superior speed while leaving an ideal finish. Using a four-cutter countersink and 11/64-inch drill bit, this product is uniquely designed to allow you to drill, countersink, and counterbore all in one step. This countersink is back by a 1-year warranty and service contract; replacement tapered bits are available.
Readmore

Technical Details

See more technical details

"Good bits, but read on...." 2001-04-06
By J. Tylicki (Germantown, WI United States)
I just purchased a set of four of these from Home Depot for less than the cost of this one. They are 6, 8, 10, and 12.

The picture shows the bit fully extended, which is adjusted through the use of a small allen wrench (not included).

It does a find job of cutting clean divots, but I am not a fine woodworker yet, so my standards may not be as exacting as some. If you have the DeWalt or Stanley 1/4" quick change adaptor, it will fit in there as well, as you can tell from the narrowing of the collar 1/2 inch up the stem.

Images Product

Buy DeWalt DW2568 #8 Countersink with 11/64-Inch Drill Bit Now

DEWALT DW5570 Heavy Duty 3/16-Inch Diamond Drill Bit

2009-10-23T23:08:00.001-07:00

Buy Cheap DEWALT DW5570 Heavy Duty 3/16-Inch Diamond Drill Bit

Buy Low Price From Here Now

Readmore

Technical Details

See more technical details

Images Product

Buy DEWALT DW5570 Heavy Duty 3/16-Inch Diamond Drill Bit Now